Spectra Precision FAST Survey Reference Manual - Manual (Page 192)

p190
Trig Leveling
Conventional Leveling
Some of the fields below only apply to one of the Leveling types. See screen shots above to see which apply.
 Pt ID:
Use this field to retrieve the elevation from an existing point in the coordinate file.
 HT:
Use this to enter the prism height. If using a digital level, this field will be gray, and will be populated with the
rod reading from the level.
 BM Elev:
Enter a known elevation for the benchmark. This field will auto-populate if a point ID is selected.
 Desc:
Enter the point description.
 Review Readings:
This allows you to enable or disable specific readings prior to storing.
 Robotics:
Use this to control the robot.
 Read:
Use this icon to take a reading.
 Store:
Use this icon to store the reading.
 Configure:
Use this icon to setup direct and reverse settings and review options.