Spectra Precision FAST Survey Reference Manual - Manual (Page 179)

p177
 Point 1, Point 2, Point 3
: These fields indicate the points that define the building face plane. Both Point 1 and
Point 2 must have horizontal coordinates to properly define the building face. For a vertical plane survey, point 3 is
not required and can be left blank.
 Get Coords
: This function allows for three methods to define the coordinates of a point. The coordinates of the
points can be manually entered into the Northing, Easting and Elevation fields. Manually entered coordinates will
not be stored in the coordinate file.
Existing point IDs can be entered into the Point ID field. These points must be defined by coordinate data. As soon as
you enter the point ID, press enter and the coordinates will appear in the Northing, Easting, and Elevation fields.
Existing points can be selected from a points list by selecting the Point List icon. Highlight the desired point and press
enter
or tap OK.