Spectra Precision FAST Survey Reference Manual - Manual (Page 71)

p69
 Options
: This command allows you to set various options for data transfer. The dialog shown in the figure below
will appear.
Com Port
: You must select which com port on the PC to use.
File Mask
: You must select a file filtering syntax.
Directory Sort
: You must select how to sort the list of files.
Display Special Files
: Toggle whether or not you should see special files.
Confirm Overwrite
: Check this to confirm before overwriting files.
Baud Rate
: You must choose the baud rate for transferring data.
Protect Remote Files
: Check this to protect files on the mobile device.
Archive RW5 Files
: Toggle YES or NO.
 Geoid
: This command will carve out a portion of the Geoid 99, EGM96, Canadian CGG2000, Canadian HT2.0,
Canadian HT1.01, Australian GDA94 and Great Britain OSG-MO2 grid files and send it to FAST Survey. Since
these geoid grids are very large, the program carves out a precise portion of it and avoids overloading the memory
on the remote device running FAST Survey. You will be prompted for the directory, on the PC, of the source Geoid
grid file, and the approximate latitude and longitude of the job, and the size of the area desired in miles, kilometers
or degrees of latitude and longitude.