Spectra Precision FAST Survey Reference Manual - Manual (Page 77)

p75
EQUIP
This chapter provides information on using the commands from the Equip menu.
Total Station
The Total Station routine allows the user to configure their total station communication and operation settings. The tabs
shown are configured based on the selected instrument (see specific instrument for details). It is recommended to go left
to right through the tabs, from Current to Comms to Settings to Search, to ensure that all settings are correct, especially
when first configuring a new instrument. Click the green check mark (not the red X) to accept all changes and continue.
Some models of equipment do not have Settings or Search.
Current Tab
Select first the manufacturer and then the model. The routine also provides an instrument recall feature that allows the
user to store and recall all instrument-related settings as a user named configuration. Configure all of the settings as
desired, and select the save button to name and store the custom configuration. Settings that will be retained are as
follows:

Instrument Settings

Communication Settings

Configure Settings

Stakeout Reference Settings