Spectra Precision FAST Survey Reference Manual - Manual (Page 156)

p154
There is a third mode for the Maximized Map which is called "Measurements". With this mode set, and running a
robotic total station, the larger map appears as shown below, with the current measurement data presented on a second
line.
The expansion of the graphic screen in stakeout can be accomplished two ways: (1) press the down arrow to expand,
up arrow to return to normal (at left) and (2) place your finger or stylus in the first line, near the "Desc" and pull down
and repeat the process and pull up the screen. (For restoring the full screen, the up arrow is the easiest method).
Stakeout Points using the Text Screen Mode
Some surveyors prefer a text screen for stakeout with no graphics and large, bold text characters. Using the Helmet, as
described above, you can select "Text" or enter Alt Y and go to Text mode for stakeout. The program then goes to a
different display mode with larger text for improved readability, as shown here: