Spectra Precision FAST Survey Reference Manual - Manual (Page 247)

p245
List” dialog.
From this dialog, you can Add stations, Edit existing stations, Remove stations, Load entire new cross section files,
Save As
(to save your changes to the current loaded file or to a new cross section file), and Clear the list of stations (not
recommended unless you want to start from scratch). Select Edit to review a station.
In this dialog, you can Add, Edit , Remove , Rearrange, or Clear existing offsets and elevations. Note that cross section
offsets are negative for left of centerline and positive for right of centerline, and can have descriptions such as SH, EOP,
CL, Ditch, 21, 22, 23, etc. These descriptions, where they exist, are potentially useful for description-based
interpolation between stations, as applied in Stake Road. If you want to add an offset at -42.867 called RP, click Add.
You don’t have to highlight the correct offset to add above — the software will sort and place the new entry
appropriately.