Spectra Precision FAST Survey Reference Manual - Manual (Page 203)

p201
fixed position.
To store an RTK point into the O-file, go into Store Points with the GPS position fixed. Enter information for point (site
id), description (site attribute), and antenna height, and click the Average button to store an OBEN average. For every
reading taken by GPS Average, an OBEN measurement will be taken to be averaged into the final measurement. The
final measurement is stored in the crd file and the O-file on the data collector, as well as the static data files on the
receiver.
Remember, the file must be recording in order to log static data from Store Points. If a point is stored, and no site is
logged, to log one, go to the Log Static Data Menu, select Start Processing, and return to Store Points. It is now
possible to log a point from Store Points.
Note
: In one reported instance, a damaged PC card caused the equipment to display a “Card Full” message. Use
the File Manager within Log Static Data to review data on the PCMCIA card in the receiver and use File
Manager to re-format the PCMCIA card on the receiver if the card appears to be causing errors. Be sure to copy
any useful information from the PC card before re-formatting, or install a new PC card.