Bit address), Figure 9-4, Shows the – Freescale Semiconductor MPC5200B User Manual
Page 271
MPC5200B Users Guide, Rev. 1
9-6
Freescale Semiconductor
Modes of Operation
Figure 9-4. Timing Diagram—Non-MUXed Mode
Figure 9-5. Timing Diagram—Burst Mode
ADDR
DATA (rd)
CS[x]
R/W
DATA (wr)
OE
TS
TSIZ[1:2]
ACK
Valid Address
Valid write Data
Valid read Data
NOTE:
1.
ACK can shorten the CS pulse width.
2.
TS is only available in Large Flash and MOST Graphics mode.
ADDR
DATA (rd)
CS[x]
R/W
OE
TS
ACK
PCI CLK
Valid read Data
Valid Address
NOTE:
1.
Burst Mode is only available for Large Flash and MOST Graphics mode.
2.
ACK is output and indicates the burst.