Dell POWEREDGE M1000E User Manual

Page 924

896

Fabric OS Command Reference

53-1002746-01

secAuthSecret

To list the shared secret WWN in Access Gateway mode:

switch:admin> secauthsecret --show

WWN DId Name
---------------------------------------
10:00:00:60:69:80:5b:e8 -1 Unknown

To set the shared secret:

switch:admin> secAuthSecret --set

This command sets up secret keys for the DH-CHAP
authentication. The minimum length of a secret key
is 8 characters and maximum 40 characters. Setting
up secret keys does not initiate DH-CHAP
authentication. If switch is configured to do DH-CHAP,
it is performed whenever a port or a switch is enabled.

Warning: Please use a secure channel for setting secrets.
Using an insecure channel is not safe and may compromise
secrets.

Following inputs should be specified for each entry.

1. WWN for which secret is being set up.
2. Peer secret: The secret of the peer that
authenticates to peer.
3. Local secret: The local secret that authenticates peer.

Press Enter to start setting up shared secrets >

Enter WWN, Domain, or switch name (Leave blank when done):
10:00:00:60:69:80:05:14
Enter peer secret:
Re-enter peer secret:
Enter local secret:
Re-enter local secret:

Enter WWN, Domain, or switch name (Leave blank when done):
Are you done? (yes, y, no, n): [no] y
Saving data to key store... Done.

To delete the entire secret key database:

switch:admin> secAuthSecret --remove --all

This command deletes database of DH-CHAP secret keys.
If a fabric requires authentication, deleting this
database may cause switch to segment from the fabric.

Do want to remove secret key database?
(yes, y, no, n): [no] y
Deleting secret key database... Done.