Dell POWEREDGE M1000E - Manual (Page 1154)

1126 Fabric OS Command Reference
53-1002746-01
Primary FCS commands
3
msTdDisable msTdDisable “ALL” must be run from the primary FCS switch.
msTdEnable msTdEnable “ALL” must be run from the primary FCS switch.
secPolicyAbort Must be run from the primary FCS switch.
secPolicyActivate Must be run from the primary FCS switch.
secPolicyAdd Must be run from the primary FCS switch.
secPolicyCreate Must be run from the primary FCS switch.
secPolicyDelete Must be run from the primary FCS switch.
secPolicyDump Can be run on all FCS switches.
secPolicyFCSMove Must be run from the primary FCS switch.
secPolicyRemove Must be run from the primary FCS switch.
secPolicySave Must be run from the primary FCS switch.
secPolicyShow Can be run on all FCS switches.
snmpConfig Can be run on all FCS switches.
tsClockServer Can be run on all switches to view the NTP server's IP address. You can only modify
the NTP server's IP address on the primary FCS switch.
zoneAdd Must be run from the primary FCS switch.
zoneCreate Must be run from the primary FCS switch.
zoneDelete Must be run from the primary FCS switch.
zoneObjectCopy Must be run from the primary FCS switch.
zoneObjectExpung Must be run from the primary FCS switch.
zoneObjectRename Must be run from the primary FCS switch.
zoneRemove Must be run from the primary FCS switch.
TABLE 6 Primary FCS commands (Continued)
Command Description