Dell POWEREDGE M1000E User Manual
Page 183
Fabric OS Command Reference
155
53-1002746-01
configUpload
2
EXAMPLES
To upload the switch configuration interactively from a switch that is not enabled for Virtual Fabrics:
switch:admin> configupload
Protocol (scp, ftp, sftp, local) [ftp]: sftp
Server Name or IP Address [host]: 192.168.38.245
User Name [user]: jdoe
File Name [
Section (all|chassis|switch [all]):
Password: ******
configUpload complete: All config parameters are uploaded
To upload the switch configuration that belongs to a logical switch with FID 100:
switch:admin> configupload
Protocol (scp, ftp, sftp, local) [ftp]: sftp
Server Name or IP Address [host]: 10.32.220.100
User Name [user]: jdoe
File Name [
Section (all|chassis|FID# [all]): 100
Password: ******
configUpload complete: All config parameters are uploaded
To upload the configuration for the entire chassis to a local file from the command line forcing an
overwrite:
switch:admin> configupload -chassis -local \
-force config.txt
configUpload complete: All config parameters are uploaded
To upload the configuration for the current logical switch to an external FTP server:
switch:admin> configupload -ftp 192.168.38.245, \
jdoe,config.txt,password
To upload all system configuration data to an external FTP server:
switch:admin> configupload -all -ftp \
192.168.38.245,jdoe,config.txt,password
To upload the system configuration file for a logical switch with FID 8 to an attached USB device:
switch:admin> configupload -fid 8 \
-USB config.txt
To upload the Virtual Fabric configuration of the current platform to an external FTP server:
switch:admin> configupload -vf -p ftp \
10.32.248.119,jdoe,/temp/switch-conf.66.txt,password
SEE ALSO