Dell POWEREDGE M1000E User Manual

Page 46

Fabric OS Command Reference

53-1002746-01

Displays the Admin Domain configuration stored in persistent memory
(defined configuration).

Displays the currently enforced Admin Domain configuration currently
enforced (effective configuration).

EXAMPLES

To enable AD5:

switch:admin> ad --activate 5
You are about to activate a new admin domain.
Do you want to activate '5' admin domain \
(yes, y, no, n): [no] y

To enable AD_13:

switch:admin> ad --activate AD_13

To add new device members to AD1:

switch:admin> ad --add AD1, -d "100,5; 4,1"

To apply all changes made to the Admin Domain configurations since --apply was last executed:

switch:admin> ad --apply
You are about to enforce the saved AD configuration.
This action will trigger ad --apply to all switches \
in the fabric.
Do you want to apply all admin domains \
(yes, y, no, n): [no] y

To clear all Admin Domain definitions:

switch:admin> ad --clear
You are about to delete all ADs definitions.
This operation will fail if zone configurations \
exists in AD1-AD254
Do you want to clear all admin domains \
(yes, y, no, n): [no] y

To create an Admin Domain with a mix of D,PI, WWNs, and zone alias device members (two different
methods shown):

switch admin> ad --create "AD1", \
-d "100,5; 1,3; 20:00:00:e0:8b:05:4d:05"

switch admin> ad --create 1, \
-d "100,5; 1,3; 21:00:00:e0:8b:05:4d:05"

To create an Admin Domain with two switches identified by domain ID and switch WWN:

switch:admin> ad --create "AD1", \
-s "100; 10:00:00:60:69:80:59:13"

To create an Admin Domain with a device list and a switch list:

switch:admin> ad --create "AD1", \
-d "100,5; 1,3; 21:20:00:00:e0:8b:05:4d:05" \
-s "100; 10:00:00:60:69:80:59:13"