Dell POWEREDGE M1000E User Manual

Page 496

468

Fabric OS Command Reference

53-1002746-01

ipAddrSet

Ethernet IP Address: 10.32.220.11
Ethernet Subnetmask: 255.255.240.0
Host Name: cp0
Gateway IP Address: 10.32.208.1

CP1
Ethernet IP Address: 10.32.220.12
Ethernet Subnetmask: 255.255.240.0
Host Name: cp1
Gateway IP Address: 10.32.208.1
IPFC address for logical fabric ID 128: 1.2.3.4/24

Backplane IP address of CP0 : 10.0.0.5
Backplane IP address of CP1 : 10.0.0.6

To delete the IPv4 address for the IPFC interface associated with a logical switch with Virtual Fabric ID
67:

switch:admin> ipaddrset -ls 67 --delete
IP address is being changed...Done.

To configure an IPv4 FC address for the IPFC interface associated with a switch that is not in Virtual
Fabric mode:

switch:admin> ipaddrset -ls 128 --add 10.32.72.70/24
IP address is being changed...Done.

To verify the changes:

switch:admin> ipaddrshow
SWITCH
Ethernet IP Address: 10.32.72.9
Ethernet Subnetmask: 255.255.240.0
Gateway IP Address: 10.32.64.1
DHCP: Off
IPFC address for virtual fabric ID 128: 10.32.72.70/24

To set the IPv4 address details for a switch chassis in interactive mode:

switch:admin> ipaddrset -chassis
Ethernet IP Address [192.168.166.148]:
Ethernet Subnetmask [255.255.255.0]:
Committing configuration...Done.

To enable DHCP on a standalone, non-AP platform:

switch:admin> ipaddrset
Ethernet IP Address [192.168.74.102]:
Ethernet Subnetmask [255.255.255.0]:
Gateway IP Address [192.168.74.1]:
DHCP [Off]: on

To enable DHCPv6 on a device:

switch:admin> ipaddrset -ipv6 -dhcpv6