Dell POWEREDGE M1000E - Manual (Page 304)

276 Fabric OS Command Reference
53-1002746-01
fabricShow
2
fabricShow
Displays fabric membership information.
SYNOPSIS fabricshow [-membership | -chassis]
fabricshow -help
DESCRIPTION Use this command to display information about switches in the fabric.
If the switch is initializing or is disabled, the message "no fabric" is displayed.
Running this command on an FCR or edge switch does not provide any router information; running this
command on an edge switch with the -membership option does provide router information.
If the fabric is reconfiguring, some or all switches may not be displayed; otherwise, the following fields
are displayed depending on the command option used:
Switch ID
The switch Domain_ID and embedded port D_ID.
World Wide Name
The switch WWN.
Enet IP Addr
The switch Ethernet IP address for IPv4- and IPv6-configured switches. For IPv6
switches, only the static IP address displays.
FC IP Addr
The switch FC IP address.
Name
The switch symbolic name. An arrow (>) indicates the principal switch.
FC Router IP Addr
The IP address of the FC Router. This field is empty if the switch is not an FC
Router or it the FC Router does not support it.
FC Router Name
The FC Router symbolic name. This field is empty if the switch is not an FC
Router or it the FC Router does not support it.
Chassis WWN
The world wide name of the chassis. For switches running firmware versions that
do not distribute the chassis WWN, this field displays "NA".
Chassis Name
The name of the chassis. For switches running firmware versions that do not
distribute the chassis name, this field displays "NA".
Fabric Name
If the fabric has an assigned name, the fabric name is displayed at the end of the
command output.