Rasman – Dell POWEREDGE M1000E User Manual
Page 913
Fabric OS Command Reference
885
53-1002746-01
rasMan
2
rasMan
Displays RASlog message text and documentation.
SYNOPSIS
rasman message_id
rasman --help
DESCRIPTION
Use this command to display documentation for a specified RASlog message. The message is specified
by its message ID. The command output is identical to the documentation provided in the Fabric OS
Message Reference. For each message, the command displays the following information:
MESSAGE
Displays the message text.
MESSAGE TYPE
Displays the message type. The message type can be one or more of the
following: LOG, FFDC, or AUDIT.
CLASS
A class value is displayed for audit messages only. Supported audit classes
include SECURITY, FIRMWARE, FABRIC FW (Fabric Watch), LS (logical switch),
CLI, MAPS (internal use only), and RAS.
SEVERITY
Indicates the message severity as one of the following: INFO, ERROR,
WARNING, CRITICAL.
PROBABLE CAUSE
Describes what may be causing the the message.
RECOMMENDED ACTION
Describes the recommended action.
NOTES
This command is available to all supported Brocade roles, including root.
This command displays only external messages in the numeric range of 1000-4999.
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
This command has the following operands:
message_id
Specifies the message ID in the following format:
shown in the RASlog message displayed on the console. For example, FW-1140
is a valid message ID, but fw-1140 is not valid.
--help
Displays the command usage.
EXAMPLES
To display documentation for a ZONE audit message:
switch:admin> rasman ZONE-3018
Log Messages ZONE-3018(7m)
MESSAGE
ZONE-3018 - Event:
Info: