Dell POWEREDGE M1000E - Manual (Page 875)

Fabric OS Command Reference 847
53-1002746-01
portStatsShow
2
er_unreachable
The number of frames discarded because the destination port cannot be reached.
er_other_discard
The number of other discarded due to route lookup failures or other reasons.
er_zone_discard
The number of class 3 frames discarded due to zone mismatch.
er_type1_miss
The number of FCR frames with transmit errors.
er_type2_miss
The number of frames with routing errors.
er_type6_miss
The number of FCR frames with receive errors.
er_zone_miss , er_lun_zone_miss
The number of frames discarded due to hard zoning miss or LUN zoning miss. If
Rx port hard zoning is enabled, frames will be discarded at the Rx port. If TX port
hard zoning is enabled, frames will be discarded at the TX port. If both RX and TX
port hard zoning is enabled, frames will be discarded at the RX port. (LUN zoning
is currently not supported.)
er_crc_good_eof
The number of CRC errors with good end-of-frame (EOF) (platform- and
port-specific).
er_inv_arb
The number of invalid arbitrated loops (ARBs).
er_single_credit_loss
The number of times the port lost a single VC_RDY primitive signal or a single
frame.
er_multi_credit_loss
The number of times the port lost multiple VC_RDY primitive signals or multiple
frames.
open
The number of times the FL_Port entered OPEN state.
transfer
The number of times the FL_Port entered TRANSFER state.
opened
The number of times the FL_Port entered OPENED state.
starve_stop
The number of loop tenancies stopped due to starvation.
fl_tenancy
The number of times the FL_Port had a loop tenancy.
nl_tenancy
The number of times the NL_Port had a loop tenancy.
zero_tenancy
The number of times a zero tenancy occurred.
ge_stat_tx_frms
The number of frames transmitted on the GbE port.
ge_stat_tx_octets
The number of octets transmitted on the GbE port.