Dell POWEREDGE M1000E - Manual (Page 1047)

Fabric OS Command Reference 1019
53-1002746-01
switchShow
2
To display blade information and port names:
switch:admin> switchshow -slot 5 -portname
FC Router: OFF
Allow XISL Use: OFF
LS Attributes:[FID: 128, Base Switch: No, Default Switch:\
Yes, Address Mode 0]
Slot Blade Type ID Status
-------------------------------------------------
5 COREBLADE 52 ENABLED
Index Slot Port Name
===================================================
384 5 0 MyName_portname0
385 5 1 ------
386 5 2 ------
To display QSFP information on a Brocade DCX 8510-4:
•
Ports 3/60-63 indicate no QSFP is present.
•
Slot 5 and 8 have QSFPs installed and the number is the group ID.
•
Port 5/6 is an example of non-contiguous ports crossing QSFP group boundaries.
switch:admin> switchshow -qsfp
switchType: 120.1
switchState: Online
switchMode: Native
switchRole: Subordinate
switchDomain: 60
switchId: fffc3c
switchWwn: 10:00:00:05:1e:40:68:78
zoning: ON (WB_DEFAULT_CFG_LSAN)
switchBeacon: OFF
FC Router: OFF
Allow XISL Use: OFF
LS Attributes: [FID: 128, Base Switch: No,
Default Switch: Yes, Address Mode 0]
Index Slot Port QSFP Address Media Speed State Proto
=============================================================
812 3 60 -- 3c2cc0 -- N8 No_Module FC
813 3 61 -- 3c2dc0 -- N8 No_Module FC
814 3 62 -- 3c2ec0 -- N8 No_Module FC
815 3 63 -- 3c2fc0 -- N8 No_Module FC
384 5 0 15 ------ id 16G No_SigDet FC
385 5 1 15 ------ id 16G No_SigDet FC
386 5 2 7 ------ id 16G No_SigDet FC
387 5 3 7 ------ id 16G No_SigDet FC
388 5 4 7 ------ id 16G No_SigDet FC
389 5 5 7 ------ id 16G No_SigDet FC
390 5 6 15 ------ id 16G No_SigDet FC
391 5 7 15 ------ id 16G No_SigDet FC
392 5 8 14 ------ -- 16G No_Module FC
393 5 9 14 ------ -- 16G No_Module FC
394 5 10 6 ------ -- 16G No_Module FC
395 5 11 6 ------ -- 16G No_Module FC
396 5 12 6 ------ -- 16G No_Module FC
397 5 13 6 ------ -- 16G No_Module FC