Dell POWEREDGE M1000E - Manual (Page 640)

612 Fabric OS Command Reference
53-1002746-01
perfShowPortEEMask
2
perfShowPortEEMask
Displays the current address mask for end-to-end performance monitors on a port.
SYNOPSIS perfshowporteemask [slot/]port
DESCRIPTION Use this command to display the current mask shared across all end-to-end (EE) performance monitors
of a port. There are only two commands that can modify the value of the EE mask: perfSetPortEEMask
and perfCfgRestore.
The end-to-end mask has 12 fields:
TxSID Domain: on
TxSID Area: on
TxSID ALPA: on
TxDID Domain: on
TxDID Area: on
TxDID ALPA: on
RxSID Domain: on
RxSID Area: on
RxSID ALPA: on
RxDID Domain: on
RxDID Area: on
RxDID ALPA: on
The fields that are marked "on" trigger end-to-end monitors. The default value of the EE mask for all
fields is "on."
NOTES This command requires an Advanced Performance Monitoring license.
This command is not supported on virtual FC ports (VE/VEX_Port), EX_Port, M (Mirror) ports and GbE
ports.
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS This command has the following operand:
slot
For bladed systems only, this operand specifies the slot number of the port on
which the monitor is to be displayed, followed by a slash (/).
port
Specifies the number of the port on which the monitor is to be displayed, relative
to its slot for bladed systems. Use switchShow for a list of valid ports.
EXAMPLES To display the end-to-end mask on a port:
switch:admin> perfshowporteemask 2/4
The EE mask on port 20 is set by application NONE
TxSID Domain: on
TxSID Area: on
TxSID ALPA: on
TxDID Domain: on
TxDID Area: on
TxDID ALPA: on
RxSID Domain: on