Fcipledtest – Dell POWEREDGE M1000E User Manual
Page 321
Fabric OS Command Reference
293
53-1002746-01
fcipLedTest
2
fcipLedTest
Exercises the GbE port LEDS on the Brocade 7800 and FX8-24.
SYNOPSIS
fcipledtest [slot | all]
DESCRIPTION
Use this command to exercise the GbE port LEDs on the Brocade 7800 and FX8-24. This test cycles
through the port LEDs by lighting GREEN and then flashing GREEN on all ports for 3 seconds. As the
test continues the ports turn AMBER and then flashing AMBER for 3 seconds. The LEDs turn off when
the test has finished.
You must disable the switch before running this command.
NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
This command has the following operands:
slot
Tests all GbE ports in the specified slot. This operand is optional; if omitted, all
GbE ports are tested. This operand is valid only on chassis-based platforms.
all
Tests all ports on the switch.
EXAMPLES
To test the LEDs on slot 4 of Brocade DCX with an FX8-24 blade.
switch:admin> fcipledtest 4
PASSED.
SEE ALSO