Dell POWEREDGE M1000E - Manual (Page 268)

240 Fabric OS Command Reference
53-1002746-01
distribute
2
distribute
Distributes data to switches in a fabric.
SYNOPSIS distribute -p policy_list -d switch_list
DESCRIPTION Use this command to distribute data to a specified list of switches in the fabric. The distributed data must
be from the list of currently supported policy sets:
SCC
Switch Connection Control Policy
DCC
Device Connection Control Policy
PWD
Password Database and Password Configuration Policy
AUTH
E_Port and F_Port Authentication Policy
FCS
Fabric Configuration Server Policy
Each supported database has a switch-local configuration parameter that controls whether the database
can be distributed and accepts distributions. Use the fddCfg command to view and modify these
parameters.
NOTES IP Filter policies cannot be distributed with the distribute command. Use the chassisDistribute
command.
The password database received from a switch running pre-v6.3.0 firmware will be rejected by a Virtual
Fabric-enabled v6.3.0 chassis if it has more than one logical switch.
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS This command has the following operands:
-p policy_list
Specify the list of policy sets, also called security databases, to be distributed.
policy_list is a semicolon-separated list. Valid values include SCC, DCC, PWD,
AUTH, and FCS.
-d switch_list
Specify the list of switches that should receive the data distribution. The
switch_list is a semicolon-separated list of one of the following:
•
Switch domain IDs
•
Switch names
•
Switch WWNs
A wildcard (*) may be specified to include all switches in the fabric that support the
distribute feature.
EXAMPLES To distribute the Switch Connection Control Policy and Device Connection Control Policy to domains 3
and 5 in the fabric:
switch:admin> distribute -p "SCC;DCC" -d "3;5"