Dell POWEREDGE M1000E - Manual (Page 243)

Fabric OS Command Reference 215
53-1002746-01
cryptoCfg
2
-all -stat
Displays runtime status information for all configured tape pools in the encryption
group.
-label pool_label | -num pool_num
Displays tape pool configuration or runtime status information for a single tape
pool specified either by a tape pool label or a number. These operands must be
used with either the -stat or the -cfg option.
-cfg | -stat
Displays either configuration information or runtime status for the specified
tape pools.
--show -LUN
Displays Crypto LUN configuration or runtime status information for a specified
CTC. This command is valid on all nodes. The following operands are supported:
crypto_target_container_name
Specifies the CTC for which to display the Crypto LUN information.
LUN_Num
Specifies the number of the LUN for which to display information.
initiator_PWWN
Specifies the PWWN of the initiator.
-cfg | -stat
Displays either the configuration or the status of the specified Crypto LUN. The
configuration can be displayed on any node in the encryption group. To display
LUN status, the specified LUN must be hosted on the local node.
--show -rekey
Displays information about rekey sessions in progress. This command is valid on
all nodes. The following operands are mutually exclusive:
-all
Lists all rekey sessions in progress on the current node.
crypto_target_container_name
Lists all rekey sessions in progress for a specified CryptoTarget container. You
may further specify either one of the following operands:
LUN_Num
Lists all rekey sessions in progress for a specific Crypto LUN of the specified
CryptoTarget container.
initiator_PWWN
Lists all rekey sessions in progress for a specific initiator of the specified
CryptoTarget container.
--show -tape_sessions
Displays runtime tape session information. This command is valid on all nodes.
The following operands are mutually exclusive:
-all
Displays runtime information for all tape sessions in progress on the local node.
crypto_target_container_name
Displays runtime information for all tape sessions in progress for a specified
CryptoTarget container.