Dell POWEREDGE M1000E - Manual (Page 597)

Fabric OS Command Reference 569
53-1002746-01
nsZoneMember
2
nsZoneMember
Displays the information on online devices zoned with a specified device.
SYNOPSIS nszonemember pid | wwn
nszonemember -a | -n | -u
nszonemember [-domain domain] [-index index]
nszonemember --help
DESCRIPTION Use this command to display information on all online devices zoned with the specified device. The
device can be specified by WWN or Port ID (PID). Use this command with the -u option to display all
unzoned devices in the entire fabric. Use the -a option to display online zoned device data for each local
device. Use the -domain and -index options to display zoned device data for a device (either local or
remote) in the fabric with the specified domain and port index combination. If a domain is not specified,
device data for a local device with the specified port index is displayed.
The command output displays the following information:
Type
U - known, N - N_Port, NL - NL_Port.
Pid
The 24-bit Fibre Channel address.
COS
A list of classes of service supported by the device.
PortName
The device's port world wide name (WWN).
NodeName
The device's node WWN.
Permanent Port Name
The physical N_Port or NL_Port WWN.
DeviceType
The device type.
Port Index
The index of the port to which the device is attached.
Shared Area
Whether or not the device shares an area with other devices.
Device Shared in Other AD
Whether or not the device is shared in other Admin Domains.
Additional lines may display if the device has registered any of the following information (the switch
automatically registers SCSI inquiry data for FCP target devices):
•
FC4 supported
•
IP address (node)
•
IPA
•
port and node symbolic name (local device only)
•
fabric port name
•
hard address or port IP address