Dell POWEREDGE M1000E - Manual (Page 52)

24 Fabric OS Command Reference
53-1002746-01
ag
2
ag --printalpamap F_Port
ag --deletepwwnfromdb PWWN
ag --clearalpamap F_Port
ag --addwwnmapping N_Port "WWN [;WWN2;...]" | --all
ag --delwwnmapping N_Port "WWN [;WWN2;...]" | --all
ag --addwwnpgmapping Port_Group "WWN [;WWN2;...]" | --all
ag --delwwnpgmapping Port_Group "WWN [;WWN2;...]" | --all
ag --addwwnfailovermapping N_Port "WWN [;WWN2;...]" | --all
ag --delwwnfailovermapping N_Port "WWN [;WWN2;...]" | --all
ag --wwnmappingenable "WWN [;WWN2;...]" | --all
ag --wwnmappingdisable "WWN [;WWN2;...]" | --all
ag --wwnmapshow
ag --reliabilitycounterset
ag --reliabilitycountershow
ag --backupmappingsave N_Port
ag --backupmappingdel N_Port
ag --backupmappingshow N_Port
DESCRIPTION Use this command to perform the following Access Gateway management functions:
•
Enable or disable Access Gateway mode.
•
Display current configuration and state of AG.
•
Configure and display F_Port to N_Port mapping.
•
Configure and display N_Port failover and failback policies.
•
Configure and display Port Group policy.
•
Create or remove a Port group.
•
Enable or disable auto port configuration (APC) modes for a Port group.
•
Get or set timeout value for fabric name monitoring.
•
Display Port Groups and member N_Ports.
•
Add or delete N_Ports in a Port group.
•
Display all policies and their status.
•
Enable or disable auto port configuration (APC) policy.
•
Enable or disable preferred secondary N_Port policy.
•
Enable, disable, and manage advanced device security (ADS) policy.
•
Manage persistent ALPA mode.
•
Manage device WWN to N_Port mappings.