Dell POWEREDGE M1000E - Manual (Page 252)

224 Fabric OS Command Reference
53-1002746-01
cryptoCfg
2
To clean up the stale crypto configurations from the ejected member node.
switch:admin> cryptocfg --reclaimWWN -cleanup
Warning: There are stale (Container|HA|Tape) cryptodb \
configurations. Please confirm to delete them.
ARE YOU SURE (yes, y, no, n): [no] y
Warning: These are the list of crypto configuration \
files to be cleaned up:
Inside /etc/fabos/mace (crypto_dek.db.0, crypto_dev.db.0, \
crypto_hac.db.0, crypto_pool.db.0, crypto_wwn.db.0).
ARE YOU SURE (yes, y, no, n): [yes] y
Operation Succeeded.
FUNCTION 5. Transaction management
SYNOPSIS cryptocfg --help transcfg
cryptocfg --commit [-force]
cryptocfg --transabort transaction_ID
cryptocfg --transshow
DESCRIPTION Use these cryptoCfg commands to manage the transaction mechanism for those functions that require
configuration changes to be committed before they take effect. These functions include "3. High
Availability (HA) cluster configuration" and "4. Storage device configuration and management"
Transaction commands must be invoked on the group leader.
OPERANDS The cryptoCfg transaction management function has the following operands:
--help transcfg
Displays the synopsis for the transaction management function.
--commit
Commits the transaction. This command saves the defined configuration to
nonvolatile storage. Changes are persistent across reboots and power cycles.
This command overwrites existing configuration parameters and therefore
prompts for confirmation. This command is permitted only when the encryption
group is in a converged state.
The following operand is optional:
-force
Commits the transaction without confirmation.
--transabort transaction_ID
Aborts a pending database transaction for any device configurations invoked
earlier through the CLI or DCFM interfaces. The following operand is required:
transaction_ID
Specifies the ID of the transaction to be aborted. Use the --transshow command
to determine the currently pending transaction ID.