Dell POWEREDGE M1000E - Manual (Page 1044)

1016 Fabric OS Command Reference
53-1002746-01
switchShow
2
OPERANDS This command has the following operands:
-slot slot
Displays blade information. You can specify this operand with -portname, but not
with any other operand.
-portname
Displays the name for each port on the switch. The port name is set by the
portName command. You can specify this operand with -slot, but not with any
other operand.
-portcount
Displays the number of ports on the switch. This operand is exclusive.
-iscsi
Displays the number of ports on the iSCSI sessions associated with GbE ports in
a switch. This operand is exclusive. (Deprecated)
-qsfp
Displays the output of the switchShow command with a QSFP column added. If a
QSFP is installed on the port, the QSFP number is displayed for the port. This
number corresponds to the physical QSFP number that can be found on the front
of each Core Blade. A double dash (--) indicates that no QSFP is present.
EXAMPLES To display the port count:
switch:admin> switchshow -portcount
FC ports = 198, GE ports = 12
To display GbE ports with iSCSI sessions:
switch:admin> switchshow -iscsi
Ports of Slot 1 ge0 ge1 ge2 ge3 ge4 ge5 ge6 ge7
-----------------+---+---+---+---+-----+---+---+---
Sessions 0 0 0 0 0 0 0 0
To display a QoS-capable Core Access Gateway with online AoQ F_Ports and N_Ports:
switch:admin> switchshow
switchName: Spirit_125
switchType: 66.1
switchState: Online
switchMode: Access Gateway Mode
switchWwn: 10:00:00:05:1e:85:95:d0
switchBeacon: OFF
FC Router: OFF
FC Router BB Fabric ID: 1
Area Port Media Speed State Proto
=====================================
0 0 -- N8 No_Module FC
1 1 -- N8 No_Module FC
2 2 -- N8 No_Module FC
3 3 -- N8 No_Module FC
4 4 -- N8 No_Module FC
5 5 -- N8 No_Module FC
6 6 -- N8 No_Module FC
7 7 -- N8 No_Module FC
8 8 -- N8 No_Module FC
9 9 id N8 Online FC F-Port \
10:00:00:05:1e:53:2c:54 0x690105 (AoQ)
10 10 id N8 Online FC F-Port \