Dell POWEREDGE M1000E - Manual (Page 802)

774 Fabric OS Command Reference
53-1002746-01
portLogTypeEnable
2
portLogTypeEnable
Enables the port log of a specified port log type.
SYNOPSIS portlogtypeenable id
DESCRIPTION Use this command to enable the port log for a specified port log type.
NOTES The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS This command has the following operand:
id
Specifies a nonzero value that corresponds to the port log type to be enabled. Use
portLogEventShow for a listing of values corresponding to supported log types.
EXAMPLES To enable logging of type 2 port log events:
switch:admin> portlogtypeenable 2
SEE ALSO portLogEventShow , portLogTypeDisable