Dell POWEREDGE M1000E - Manual (Page 1004)

976 Fabric OS Command Reference
53-1002746-01
spinFab
2
-nframes count
Determines how many frames will be sent by spinfab on the link to spin. Default is
2. The maximum number is 5. If you want to configure more than 5 use -nframes
0.
-pattern name
Forces spinfab to use a particular data pattern for the frames it spins between
ports. The pattern can be a user defined pattern or is selected from a set of twenty
five predefined pattern types. Use the datatypeshow command to view the
predefined patterns supported with spinfab. For each pattern, the datatypeshow
command displays the name, the pattern type number, and an example. Specify
the pattern by its name after the -pattern option. If pattern is not specified, it
defaults to jCRPAT (type=17). To use a user defined pattern, follow the -pattern
option with a 32 bit hexadecimal number.
-timeout count
Defines a time limit (in seconds) for the running of spinfab. Spinfab will keep track
of how long the test has run and stop testing once the timeout limit has been
reached. The overall accuracy will be in the tens of seconds.
DIAGNOSTICS When it detects failures, the test may report one or more of the following error messages. If errors
persist, contact Technical Support.
DATA
ERR_STAT
ERR_STATS
ERR_STATS_2LONG
ERR_STATS_BADEOF
ERR_STATS_BADOS
ERR_STATS_C3DISC
ERR_STATS_CRC
ERR_STATS_ENCIN
ERR_STATS_ENCOUT
ERR_STATS_TRUNC
ERR_STAT_2LONG
ERR_STAT_BADEOF
ERR_STAT_BADOS
ERR_STAT_C3DISC
ERR_STAT_CRC
ERR_STAT_ENCIN
ERR_STAT_ENCOUT
ERR_STAT_TRUNC
FINISH_MSG_ERR
INIT
MBUF_STATE_ERR
NO_SEGMENT
PORT_ABSENT
PORT_DIED
PORT_ENABLE
PORT_M2M
PORT_STOPPED
PORT_WRONG
RXQ_RAM_PERR
STATS
STATS_C3FRX
STATS_FRX
STATS_FTX
TIMEOUT
XMIT