Dell POWEREDGE M1000E - Manual (Page 146)

118 Fabric OS Command Reference
53-1002746-01
cfgTransAbort
2
cfgTransAbort
Aborts the current zoning transaction.
SYNOPSIS cfgtransabort [token]
DESCRIPTION Use this command to abort the current zoning transaction without committing it. All changes made since
the transaction was started are removed and the zone configuration database is restored to the state
before the transaction was started.
If a transaction is open on a different switch in the fabric when this command is run, the transaction on
the other switch remains open and unaffected.
NOTES The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
When an FCS policy is enabled, this command can be issued only from the primary FCS switch.
OPERANDS When invoked without an operand, this command aborts the current transaction. The following operand
is optional:
token
Specify the token ID of the transaction to be aborted. Use the cfgTransShow
command to obtain the token ID of a transaction.
EXAMPLES To abort the current transaction:
switch:admin> cfgtransabort
SEE ALSO cfgAdd , cfgClear , cfgCreate , cfgDelete , cfgDisable , cfgEnable , cfgRemove , cfgSave , cfgShow ,
cfgTransShow