Portlogshowport – Dell POWEREDGE M1000E User Manual

Page 800

772

Fabric OS Command Reference

53-1002746-01

portLogShowPort

Displays the port log of a specified port with page breaks.

SYNOPSIS

portlogshowport port_index

DESCRIPTION

Use this command to display the port log of a specified port with page breaks. This command displays
the same information as portLogDumpPort, except that portLogDumpPort does not prompt you to
press Enter to display the next page.

If the command is executed while the port log is disabled, a warning message is displayed. Refer to the
portLogClear command for more information.

NOTES

Refer to the portLogShow command for a description of the data returned by this command.

The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.

OPERANDS

This command has the following operands:

port_index

Displays the port log for a single port specified by its port index number. Use
switchShow for a listing of valid port index numbers.

EXAMPLES

To display the port log for port 14:

switch:user> portlogshowport 14
time task event port cmd args
------------------------------------------------------
08:35:28.483 tFabric scn 14 0
08:35:27.899 tShell pstate 14 OL1
08:35:27.899 tReceive pstate 14 LR2
08:35:27.916 tReceive pstate 14 AC
08:35:28.416 interrupt scn 14 1
08:35:28.433 tFabric ioctl 14 90 101d9910,0
08:35:28.433 tFabric Tx 14 164 \
02fffffd,00fffffd,0005ffff,10000000
08:35:28.433 tReceive Rx 14 0 \
c0fffffd,00fffffd,00050006
08:35:28.433 tReceive Rx 14 164 \
03fffffd,00fffffd,00050006,02000000
08:35:28.433 tTransmit Tx 14 0 \
c0fffffd,00fffffd,00050006
08:35:28.433 tFabric ioctl 14 91 103646d8,0
08:35:28.433 tFabric ioctl 14 92 103646d8,0
08:35:28.466 tFabric ioctl 14 a7 3c,1
08:35:28.466 tFabric pstate 14 LR1
08:35:28.466 tReceive pstate 14 LR3
08:35:28.466 tReceive pstate 14 AC
(output truncated)