Dell POWEREDGE M1000E - Manual (Page 365)

Fabric OS Command Reference 337
53-1002746-01
fcrPhyDevShow
2
fcrPhyDevShow
Displays the FC Router physical device information.
SYNOPSIS fcrphydevshow [-a][-f FID][-w wwn][-c][-d] [-h]
DESCRIPTION Use this command to display the physical (real) devices that are configured to be exported to other
fabrics. A device is considered to be configured to be exported to another fabric if it is a member of an
LSAN zone. The device is displayed only if it is discovered in the EX_Port-attached fabric and backbone
fabric's name server (for instance, the device is online).
Physical device information is available only for physical devices that exist in fabrics attached to
EX_Ports of FC Routers on the same backbone fabric as the current FC Router.
The default output displays only physical device information relevant to the current FC Router. Relevant
physical devices include physical devices that are configured to be exported from fabrics attached to the
current FC Router's EX_Ports.
The physical devices are listed by fabric.
The -f and -w operands allow searching for physical devices based on fabric ID or port world wide name.
"No device found" is displayed if there is no physical device information available at the current FC
Router.
Each line of the output displays:
Device Exists in Fabric
The fabric in which the physical device exists.
WWN
The world wide name of the device port.
Physical PID
The port ID of the physical device. This port ID is only relevant on the fabric
specified by the "Device Exists in Fabric" column.
NOTES The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS This command has the following operands:
-a
Displays all physical devices for all FC Routers in the same backbone fabric
whether or not they are relevant to the current FC Router.
-a -f FID
Displays the physical devices in the specified fabric for all FC Routers in the same
backbone fabric whether or not they are relevant to the current FC Router.
-w wwn
Displays the physical devices with the specified port WWN.
-c
Clears login-related counters.
-d
Displays the following login-related counters. Counters are cleared upon reboot or
failover.
login try
The number of times the device attempted to log in.