Dell POWEREDGE M1000E User Manual

Page 1015

Fabric OS Command Reference

987

53-1002746-01

supportFtp

-R

Clears all supportFtp parameters.

-e

Enables auto file transfer. Trace dump files are automatically transferred to a
designated FTP server. The server parameters must be set before you can enable
auto file transfer.

-d

Disables auto file transfer.

EXAMPLES

To set the FTP parameters:

switch:admin> supportftp -s -h 1080::8:800:200C:417A \
-u admin -p password -d support -l sftp
supportftp: ftp parameters changed.

To display the FTP parameters:

switch:admin> supportftp
Host IP Addr: 1080::8:800:200C:417A
User name: admin
Remote Dir: support
Auto Upload protocol: sftp
Auto-FTP: Off

To set FTP parameters interactively:

switch:admin> supportftp -s
Host IP Addr[1080::8:800:200C:417A]:192.168.67.126
User Name[admin]: admin
Password[********]:password
Remote Dir[support]:
Auto upload protocol[ftp]:scp
Auto file transfer parameters changed

To set the time interval at which the FTP server connectivity is checked:

switch:admin> supportftp -t 24
supportftp: ftp check period changed.

To enable auto file transfer:

switch:admin> supportftp -e
support auto file transfer enabled.

To disable auto file transfer:

switch:admin> supportftp -d
support auto file transfer disabled.