Dell POWEREDGE M1000E - Manual (Page 687)

Fabric OS Command Reference 659
53-1002746-01
portCfgCompress
2
switch:admin> lscfg --config 15 -port 2
This operation requires that the affected ports be disabled.
Would you like to continue [y/n]?: y
Checking for cap port 2
After Checking for cap port 2
val 1 port 2
lscfg: The port cannot be moved to the requested switch because
port or ports have Encryption/Compression enabled. Please disable
the Encryption/Compression configuration.
FID: 15
Slot: 0
Port: 2
To disable the compression configuration:
switch:admin> portcfgcompress --disable 2
To enable compression configuration when maximum number is reached:
switch:admin> portcfgcompress --enable 2
Configuration is not allowed. Maximum number of ports is
already configured for Encryption/Compression.
SEE ALSO portCfgEncrypt , portEncCompShow