Dell POWEREDGE M1000E User Manual
Page 232
204
Fabric OS Command Reference
53-1002746-01
cryptoCfg
2
-
Rekey status: 0 = rekey in progress, 1 = no rekey in progress
-
Key expiration time: date and time
-
Time remaining to Auto Rekey: Displays key life for LUNs that
-
are currently being rekeyed and after the rekey is complete.
-
The remaining Key life period is displayed in the following format: num_yrs, num_months,
num_days, num_minutes.
When used with -cfg the --show -LUN command displays LUN configuration information:
•
EE node: node WWN
•
EE slot: slot number
•
Target: target port WWN and node NWWN
•
VT: virtual target port WWN and node WWN
•
Number of hosts: numeric value
•
Configuration status: committed or defined
•
For each host:
-
Host port WWN and node WWN
-
Virtual initiator port WWN and node WWN
-
Virtual initiator PID
•
Number of LUNs
•
For each LUN:
-
LUN number: numeric identifier
-
LUN type: disk, tape drive, tape medium changer, tape attached medium changer,
offline/unknown, or unsupported/other
-
LUN status: numeric value
-
Encryption mode: encrypt or cleartext
-
Encryption format: native or DF compatible
-
Tape policy type: pool-based or LUN-based
-
Encrypt existing data: disabled or enabled
-
Rekey: disabled or enabled
-
Key ID state: Read, Write, or Key ID not applicable
-
Key life (in days): numeric value
-
Volume/pool label: user-defined label
-
Rekey status: numeric value
If rekey- or tape sessions are in progress, the command shows the following information:
•
Number of rekey sessions in progress: numeric value
•
For each rekey session the display includes the following parameters:
-
Rekey session number: numeric value
-
Percent completion: numeric value
-
Rekey state: Read or Write phase
Use the --show -rekey command to display all rekey sessions in progress on the current node or for a
specified container. The display includes the following information:
•
Number of rekey sessions in progress: numeric value
•
For each rekey session, the display includes the following parameters:
-
Container name: user-define label
-
EE node: node WWN
-
EE slot: Slot number