Dell POWEREDGE M1000E - Manual (Page 449)

Fabric OS Command Reference 421
53-1002746-01
fwPortDetailShow
2
When used without operands, this command displays information for all ports.
NOTES This command requires a Fabric Watch license.
Port errors are not supported for virtual ports and SFP errors are not applicable for virtual ports.
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS This command has the following operands:
--p port
Displays a port detail report for the specified port.
--s portState
Displays a port detail report for the specified portState. Valid portState entries
include the following:
h
Report based on all healthy ports.
m
Report based on all marginal ports.
f
Report based on all faulty ports.
o
Report based on all offline ports.
EXAMPLES To retrieve a port detail report for a switch configured with an IPv6 address:
switch:user> fwportdetailshow
Port Detail Report \
Report time: 09/11/2006 05:51:15 PM
Switch Name: switch
IP address: 1080::8:800:200C:417A
Port Exception report [by All]
--------Port-Errors------------
Port# Type State Dur(H:M) LFA LSY LSI PER INW \
-------------------------------------------------\
000 U OFFLINE 080:24 - - - - - \
001 E HEALTHY 073:22 - - - - - \
002 L HEALTHY 080:24 - - - - - \
003 U OFFLINE 080:24 - - - - - \
004 U OFFLINE 002:53 - - - - - \
-----SFP-Errors----
CRC PSC BLP STM SRX STX SCU SVO
-------------------------------
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
(output truncated)