Dell POWEREDGE M1000E - Manual (Page 740)

712 Fabric OS Command Reference
53-1002746-01
portCfgShow
2
vlantag
Displays the VLAN tagging configuration. For each entry, the output displays the
IP interface address, the destination IP address, the VLAN ID, and the L2 CoS
priority. This display includes permanent entries only. Permanent entries are
configured at the IP interface level with the portCfg vlantag command. To view
VLAN tagged tunnels and circuits along with permanent entries, use the
portShow vlantag command.
fciptunnel
Displays FCIP tunnels and related parameters. Valid arguments for fciptunnel
include the following:
all
Displays information for all FCIP tunnels.
ve_port
Displays information for the specified FCIP tunnel. To display the tunnel, specify
the VE_Port number associated with the tunnel configured on one of the GbE
ports. VE_Ports are numbered 16-23.
-ipsec
Displays whether IPSec is enabled or disabled. If enabled, the key is displayed. If
IPSec is enabled and configured in legacy mode, the mode is displayed as
"legacy". The mode information is displayed whether or not you issue the -ipsec
option. This operand is optional.
mgmtif ge_port
Displays the inband management interfaces configured for a specified GbE Port.
The display includes the interface status (enabled or disabled), the interface IPv4
Address, the netmask, effective MTU, and annotated port flags.
mgmtroute ge_port
Displays the management routes configured for a specified GbE Port. The display
includes the destination IPv4 Address, the netmask, the gateway address, and
annotated port flags. The metric field is not valid for the Brocade 7800.
EXAMPLES To display the port configuration settings for a single port on a Brocade DCX 8510-8:
switch:admin> portcfgshow 10/38
Area Number: 222
Octet Speed Combo: 1(16G|8G|4G|2G)
Speed Level: AUTO(HW)
AL_PA Offset 13: OFF
Trunk Port ON
Long Distance LS
VC Link Init OFF
Desired Distance 10 Km
Reserved Buffers 86
Locked L_Port OFF
Locked G_Port OFF
Disabled E_Port OFF
Locked E_Port OFF
ISL R_RDY Mode OFF
RSCN Suppressed OFF
Persistent Disable OFF
LOS TOV enable OFF
NPIV capability ON
QOS E_Port AE
Port Auto Disable: ON LOSG OLS NOS LIP
Rate Limit OFF
EX Port OFF
Mirror Port OFF