Dell POWEREDGE M1000E - Manual (Page 558)

530 Fabric OS Command Reference
53-1002746-01
lsCfg
2
7 | | 2 | | | | | | |
8 | | 2 | | | | | | |
9 | | 2 | | | | | | |
10 | | 2 | | | | | | |
11 | | 2 | | | | | | |
To display the partition configuration for all slots with the -ge option:
switch:admin> lscfg --show -provision -ge
Created switches: 128(ds) 2(bs) 1
Slot 1 2 3 4 5 6 7 8
-------------------------------------------------------
Port
0 | 128 | 2 | | | | | 128 | 128 |
1 | 128 | 2 | | | | | 128 | 128 |
2 | 128 | 2 | | | | | 128 | 128 |
3 | 128 | 2 | | | | | 128 | 128 |
4 | 128 | 2 | | | | | 128 | 128 |
5 | 128 | 2 | | | | | 128 | 128 |
6 | 128 | 2 | | | | | 128 | 128 |
7 | 128 | 2 | | | | | 128 | 128 |
8 | 128 | 2 | | | | | 128 | 128 |
9 | 128 | 2 | | | | | 128 | 128 |
10 | 128 | 2 | | | | | 128 | 128 |
11 | 128 | 2 | | | | | 128 | 128 |
To change the fabric ID for a logical switch:
switch:admin> lscfg --change 1 -newfid 2
Changing of a switch fid requires that the switch be disabled.
Would you like to continue [y/n]?: y
Disabling switch...
All active login sessions for FID 2 have been terminated.
Checking and logging message: fid = 2.
Please enable your switch.
To display the change:
switch:admin> lscfg --show
Created switches: 128(ds) 1 2(bs)
Port 0 1 2 3 4 5 6 7 8 9
----------------------------------------------------------------
FID 1 | 1 | 1 | 1 | 1 | 128 | 128 | 128 | 128 | 128 |
Port 10 11 12 13 14 15 16 17 18 19
----------------------------------------------------------------
FID 128 | 128 | 128 | 128 | 128 | 128 | 128 | 128 | 128 | 128 |
Port 20 21 22 23 24 25 26 27 28 29
----------------------------------------------------------------
FID 128 | 128 | 128 | 128 | 128 | 128 | 128 | 128 | 128 | 128 |
Port 30 31 32 33 34 35 36 37 38 39
----------------------------------------------------------------
FID 128 | 128 | 128 | 128 | 128 | 128 | 128 | 128 | 128 | 128 |