Dell POWEREDGE M1000E - Manual (Page 883)

Fabric OS Command Reference 855
53-1002746-01
portSwapEnable
2
portSwapEnable
Enables the PortSwap feature.
SYNOPSIS portswapenable
DESCRIPTION Use this command to enable the PortSwap feature. The portSwap command cannot be used unless the
feature is first enabled with this command.
The enabled state of the PortSwap feature is persistent across reboots and power cycles.
Enabling or disabling the PortSwap feature does not affect previously performed PortSwap operations.
NOTES The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS None
EXAMPLES To enable the PortSwap feature:
switch:admin> portswapenable
SEE ALSO portSwap , portDisable , portEnable , portShow , portSwapDisable , portSwapShow , switchShow