Dell POWEREDGE M1000E - Manual (Page 485)

Fabric OS Command Reference 457
53-1002746-01
interfaceShow
2
downReason
Type of last State Change Notification that caused this interface to go down.
iState
Current state of this interface. The state can be UP or DOWN. An interface in
DOWN state does not have an allocated neighbor data structure and cannot be
used to route traffic to other switches.
state
Current state of this interface. This E_Port is used to route traffic to other switches
only if the state is NB_ST_FULL.
lastTransition
Time the last state changed on this interface.
nghbCap
Neighbor capabilities. Should be 0.
nghbId
Domain ID of the neighbor (adjacent) switch.
idbNo
IDB number. Should be equal to port.
remPort
Port number on the remote switch connected to this port.
nflags
Internal FSPF flags.
initCount
Number of times this neighbor was initialized without the interface going down.
lastInit
Time of the last initializing state, NB_ST_INIT, on this interface.
firstHlo
Time of the first hello sent on this interface.
nbstFull
Time of the last finishing state, NB_ST_FULL, on this interface.
&dbRetransList
Pointer to the database retransmission list.
&lsrRetransList
Pointer to the link state records (LSR) retransmission list.
&lsrAckList
Pointer to the link state acknowledgements (LSA) retransmission list.
inactTID
Inactivity timer ID.
helloTID
Hello timer ID.
dbRtxTID
Database retransmission timer ID.
lsrRtxTID
LSR retransmission timer ID.
inactTo
Inactivity timeout value, in milliseconds. When this timeout expires, the adjacency
with the neighbor switch is broken and new paths are computed to all possible
destination switches in the fabric.