Dell POWEREDGE M1000E - Manual (Page 278)

250 Fabric OS Command Reference
53-1002746-01
enclosureShow
2
enclosureShow
Displays attributes of the switch enclosure.
SYNOPSIS enclosureshow attribute
DESCRIPTION Use this command to display attributes of the switch enclosure, including the vendor-specific enclosure
identifier and the identifier of the enclosure interface to which the switch is attached.
This command applies to products that are embedded in a blade server or storage chassis. Most options
are platform-specific. Options that do not apply to a platform are identified with a "Not supported on this
platform" message.
NOTES The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS This command has the following operand:
attribute
Specifies the enclosure attribute. Valid attributes include the following:
id
The vendor-specific enclosure identifier.
modelname
The vendor-specific enclosure model name.
slotid
The identifier of the enclosure interface to which the switch is attached.
rackname
The name assigned by the enclosure manager to the rack.
rackid
The serial number assigned by the enclosure manager to the rack.
enclosurename
The name assigned by the enclosure manager to the enclosure.
enclosureid
The serial number assigned by the enclosure manager to the enclosure.
connname
The product name used by the enclosure manager for the switch model.
connaddr
The connector address used by the enclosure manager for this switch (indicates
the physical position of the switch in the enclosure).
connid
The serial number of the switch used by the enclosure manager (not to be
confused with the Factory Serial Number).
conntype
The connector type used by the enclosure manager for this model of switch.
connloc
The switch location within the enclosure.
connpres
Information about the presence of the switch that is used by the enclosure
manager.