Dell POWEREDGE M1000E - Manual (Page 233)

Fabric OS Command Reference 205
53-1002746-01
cryptoCfg
2
-
Target: target port WWN and node WWN
-
Target PID: target PID
-
VT: virtual target port WWN and node WWN
-
VT PID: virtual target PID
-
Host (initiator) PWWN
-
Host (initiator): node WWN
-
Host (initiator) PID: hoist PID
-
VI: virtual initiator port WWN and node WWN
-
VI PID: virtual initiator PID
-
LUN Number: numeric identifier
-
LUN Serial Number: alpha-numeric identifier
-
Percentage complete: numeric value
-
Rekey state displays one of the following parameters:

Read Phase
 Write Phase
 HA Sync Phase
 LUN Cleanup
-
Rekey role: Primary or Backup
-
Block Size: in KB
-
Current logical block address (LBA) being processed: block address
Use the --show -rekey crypto_target_container_name LUN_Num initiator_PWWN command to display
all rekey sessions in progress for a specific Crypto LUN/initiator pair of a specific CryptoTarget container.
The display includes the following information:
•
LUN number: numeric ID
•
LUN Serial Number (SN): alpha-numeric label
•
CryptoTarget container Name: user-defined name
•
Target: target port WWN and node WWN
•
Target PID: target PID
•
EE node name: node WWN
•
EE slot: slot number
•
Number of rekey sessions in progress: numeric value
•
For each rekey session the display includes the following parameters:
-
Rekey session number: numeric value
-
Percent completion: numeric value
-
Rekey state. Displays one of the following parameters:

Rekey Setup
 LUN Prep
 Key Update
-
Operation in progress. Displays one of the following parameters:

Read Phase
 Write Phase
 HA Sync Phase
 LUN Cleanup
-
VI: virtual initiator port WWN and node WWN
-
VI PID: virtual initiator PID