Dell POWEREDGE M1000E - Manual (Page 260)

232 Fabric OS Command Reference
53-1002746-01
defZone
2
A cfgSave, cfgEnable, or cfgDisable command must be performed subsequent
to the use of this command to commit the changes and distribute them to the
fabric. If a cfgSave is performed and the fabric is already in the No Access default
zone state, a cfgDisable is sent to the fabric. For example:
•
defzone --allaccess
•
cfgsave
An audit log record is generated for each use of this command.
--show
Displays the current state of the default zone access mode.
EXAMPLES To create a default zone configuration:
primaryfcs:admin> cfgactvshow
Effective configuration:
No Effective configuration
primaryfcs:admin> defzone --noaccess
primaryfcs:admin> cfgsave
primaryfcs:admin> defzone --show
Default Zone Access Mode
committed - No Access
transaction - No Transaction
primaryfcs:admin> cfgactvshow
Effective configuration:
No Effective configuration: (No Access)
SEE ALSO None