Dell POWEREDGE M1000E - Manual (Page 544)

516 Fabric OS Command Reference
53-1002746-01
licenseSlotCfg
2
licenseSlotCfg
Configures and displays slot-based licensed features.
SYNOPSIS licenseslotcfg --add feature slot
licenseslotcfg --remove feature slot
licenseslotcfg --show
licenseslotcfg --help
DESCRIPTION Use this command to configure and manage licenses for the Brocade FX8-24 extension blade on the slot
where the blade is installed.
Slot-based licenses allow you to select the slots the license will enable up to the purchased capacity and
thereby increase existing capacity without disrupting the slots for which licensed features are already
enabled.
There is a separate slot-based license key for each licensed feature supported on the blade. For
example, the Brocade FX8-24 supports slot-based license keys for each of the following features:
•
10 GbE license - Enables the two 10GbE ports on the Brocade FX8-24.
•
Advanced Extension license - Enables FCIP Trunking and Adaptive Rate Limiting.
•
Advanced FICON Acceleration license - Accelerates FICON tape read and write and IBM Global
Mirror data replication operations over distance.
A license key with the specified capacity must be installed with the licenseAdd command before you can
enable the feature on a specified slot with the licenseSlotCfg command. Refer to the Fabric OS
Administrator's Guide for more information.
NOTES The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS feature
Specifies the licensed feature to be added at the specified slot. The feature is
specified as a tag from the following set of licenses:
FTR_AE
Advanced Extension license
FTR_AFA
Advanced FICON Acceleration license
FTR_10G
10 Gigabit Ethernet license
slot
Specifies the slot number for the Brocade FX8-24 extension blade. This number
corresponds to the physical blade slot number on the chassis (1-4, 9-12 on the
Brocade DCX; 1-2, 7-8 on the Brocade DCX-4S).
--add
Adds a slot-based license to the specified slot.
--remove
Removes a slot-based license from the specified slot. This operation frees up the
license to be assigned to another slot. You must disable the applications that use
the license on this slot before you can deactivate the license.