Dell POWEREDGE M1000E - Manual (Page 142)

114 Fabric OS Command Reference
53-1002746-01
cfgShow
2
Asterisk (*)
Matches any string of characters.
Range
Matches any character within the range. Ranges must be enclosed in square
brackets, for example, [0-9] or [a-f].
mode
Specify 0 to display the contents of the transaction buffer (the contents of the
current transaction) or specify 1 to display the contents of nonvolatile memory.
The default value is 0.
--transdiffs
Displays changes in the current transaction.
--transdiffsonly
Displays only the changes in the current transaction.
EXAMPLES To display all zone configurations that start with "Test":
switch:admin> cfgshow "Test*"
cfg: Test1 Blue_zone
cfg: Test_cfg Red_zone; Blue_zone
To display all zone configuration information:
switch:admin> cfgshow
Defined configuration:
cfg: USA1 Blue_zone
cfg: USA_cfg Red_zone; Blue_zone
zone: Blue_zone
1,1; array1; 1,2; array2
zone: Red_zone
1,0; loop1
alias: array1 21:00:00:20:37:0c:76:8c; \
21:00:00:20:37:0c:71:02
alias: array2 21:00:00:20:37:0c:76:22; \
21:00:00:20:37:0c:76:28
alias: loop1 21:00:00:20:37:0c:76:85; \
21:00:00:20:37:0c:71:df
Effective configuration:
cfg: USA_cfg
zone: Blue_zone
1,1
21:00:00:20:37:0c:76:8c
21:00:00:20:37:0c:71:02
1,2
21:00:00:20:37:0c:76:22
21:00:00:20:37:0c:76:28
zone: Red_zone
1,0
21:00:00:20:37:0c:76:85
21:00:00:20:37:0c:71:df
To display only configuration names:
switch:admin> cfgshow "*"
cfg: USA1 Blue_zone
cfg: USA_cfg Red_zone; Blue_zone