Portzoneshow – Dell POWEREDGE M1000E User Manual

Page 904

876

Fabric OS Command Reference

53-1002746-01

portZoneShow

Displays the enforced zone type of the F_Ports and FL_Ports of a switch.

SYNOPSIS

portzoneshow

DESCRIPTION

Use this command to display the enforced zone type of the F_Ports and FL_Ports of a switch.

Output shows virtual port number (decimal), physical port number (decimal), online status, and if online,
port type. If the current zone configuration has been disabled by cfgDisable, the fabric is in non-zoning
mode, in which all devices see each other. When default zoning is enabled with "No Access" mode, "No
Effective configuration: (No Access)" is displayed.

NOTES

The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.

OPERANDS

None

EXAMPLES

To display the zone membership information of ports:

switch:user> portzoneshow
[OUTPUT TRUNCATED]
PORT: 160 (160) Offline
PORT: 161 (161) Offline
PORT: 162 (162) Offline
PORT: 163 (163) Offline
PORT: 164 (164) Offline
PORT: 165 (165) Offline
PORT: 166 (166) Offline
PORT: 167 (167) Offline
PORT: 168 (168) FL-Port Enforcement: HARD WWN \
defaultHard: 0 IFID: 0x4332000a
PORT: 169 (169) Offline
PORT: 170 (170) Offline
PORT: 171 (171) Offline
PORT: 172 (172) Offline
PORT: 173 (173) Offline
PORT: 174 (174) Offline
PORT: 175 (175) Offline
PORT: 176 (176) F-Port Enforcement: HARD WWN \
defaultHard: 0 IFID: 0x4342002a
PORT: 177 (177) Offline
PORT: 178 (178) Offline
PORT: 179 (179) Offline
PORT: 180 (180) Offline
(output truncated)