Dell POWEREDGE M1000E - Manual (Page 262)

234 Fabric OS Command Reference
53-1002746-01
diagDisablePost
2
diagDisablePost
Disables the power-on self-test (POST).
SYNOPSIS diagdisablepost
DESCRIPTION Use this command to disable POST. A reboot is not required for this command to take effect. Use the
diagPost command to display the current POST status, and use diagEnablePost to enable POST.
NOTES The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS None
EXAMPLES To disable the POST:
switch:admin> diagdisablepost
Config update Succeeded
Diagnostic POST is now disabled.
SEE ALSO diagEnablePost , diagPost