Dell POWEREDGE M1000E - Manual (Page 194)

166 Fabric OS Command Reference
53-1002746-01
configureChassis
2
configureChassis
Changes chassis-level system configuration settings.
SYNOPSIS configurechassis
DESCRIPTION Use this command to modify chassis-level system configuration settings.
Configuration data is grouped into chassis information and switch information. Each configuration type is
managed separately.
Use the configure command to modify switch configuration parameters. Use the configureChassis
command to modify the following chassis configuration parameters:
•
Cfgload attributes
•
Custom Attributes
•
System settings
•
fos attributes
This command requires chassis permissions in both Virtual Fabric and non-Virtual Fabric environments.
The configureChassis command interactively presents a hierarchical menu. Each top-level heading
and its associated subheadings consist of a text prompt, a selection of valid values, and a default value
(in brackets).
The following keys control the execution of the command:
Return
When entered at a prompt with no preceding input, the command accepts the
default value (if applicable) and moves to the next prompt.
Interrupt (Ctrl-C)
Aborts the command immediately and ignores all changes made.
End-of-file (Ctrl-D)
When entered at a prompt with no preceding input, terminates the command and
saves changes made.
The following parameters can be modified with the configureChassis command:
Cfgload Attributes
Configures configuration upload and download parameters.
Enforce secure Config Upload/Download
Enables (yes) or disables (no) secure configuration upload or download. The
default value is "no.
Enforce signature validation for firmware
Enables (yes) or disables (no) signature validation enforcement. By default, this
feature is disabled (no).
Add Suffix to the uploaded file name
Appends a suffix to the uploaded configuration file. The suffix includes the chassis
name and a time stamp in the yyymmdd_hhmmss format. Refer to the example
section for an illustration. This feature is disabled by default.
Custom Attributes
The following custom attributes can be modified.
config Index
OEM custom configuration. The range is 0 through 10000. The default is 0. This
attribute is for internal use only.