Dell POWEREDGE M1000E User Manual

Page 618

590

Fabric OS Command Reference

53-1002746-01

pathInfo

Port 3 12
Tx Rx Tx Rx
---------------------------------------
B/s (1s) 36 76 0 0
B/s (64s) 5 - 0 -
Txcrdz (64s) 0 - 0 -
F/s (1s) 1 1 0 0
F/s (64s) 0 0 0 0
Words 240434036 2294316 2119951 2121767
Frames 20025929 54999 162338 56710
Errors - 4 - 0

Hop In Port Domain ID (Name) Out Pot BW Cost
---------------------------------------------------------
2 14 8 (web228) E - -
(output truncated)

To display the TI-enabled path information over an FCR in interactive mode:

switch:admin> pathinfo
Max hops: (1..127) [25]
Fabric Id: (1..128) [-1] 8
Domain|Wwn|Name: [] 5
Source port: (0..400) [-1] 2
Destination port: (0..400) [-1] 24
Source pid: (0x0..0xefff00) [ffffffff] 0x061600
Destination pid: (0x0..0xefff00) [ffffffff] 0x01f001
Basic stats (yes, y, no, n): [no]
Extended stats (yes, y, no, n): [no]
Trace reverse path (yes, y, no, n): [no] y
Source route (yes, y, no, n): [no]
Timeout: (1000..30000) [10000]

Target port is Embedded

Hop In Port Domain ID (Name) Out Pot BW Cost
---------------------------------------------------------
0 2 1 (web228) 6 4G 500
1 23 2 (web228) 8 4G 500
2 4 3 (web228) 3 4G 500
3 2 4 (web228) 24 4G 10000
4 3 7 (switch_3) 2 4G 500
5 27 5 (switch_3) 24 - -

Reverse path
6 24 5 (switch_3) 27 4G 500
7 2 7 (switch_3) 3 4G 500
8 24 4 (web228) 2 4G 500
9 3 3 (web228) 4 4G 10000
10 8 2 (web228) 23 4G 500
11 6 1 (web228) 2 - -