Dell POWEREDGE M1000E - Manual (Page 117)

Fabric OS Command Reference 89
53-1002746-01
bottleneckMon
2
Jan 13 18:54:10 Jan 13 18:54:15 20.00
Jan 13 18:54:15 Jan 13 18:54:20 80.00
Jan 13 18:54:20 Jan 13 18:54:25 0.00
Jan 13 18:54:25 Jan 13 18:54:30 0.00
Jan 13 18:54:30 Jan 13 18:54:35 40.00
To display bottleneck configuration details for the switch:
switch:admin> bottleneckmon --status
Bottleneck detection - Enabled
==============================
Switch-wide sub-second latency bottleneck criterion:
====================================================
Time threshold - 0.800
Severity threshold - 50.000
Switch-wide alerting parameters:
=================================
Alerts - Congestion only
Congestion threshold for alert - 0.800
Averaging time for alert - 300 seconds
Quiet time for alert - 300 seconds
Per-port overrides for sub-second latency bottleneck criterion:
===============================================================
Slot Port TimeThresh SevThresh
=========================================
1 3 0.500 100.000
1 4 0.600 50.000
1 5 0.700 20.000
Per-port overrides for alert parameters:
========================================
Slot Port Alerts? LatencyThresh CongestionThresh Time(s) QTime(s)
=================================================================
1 1 Y 0.100 0.800 300 300
1 2 C -- 0.800 600 600
1 3 L 0.100 -- 300 300
1 4 N -- -- -- --
Excluded ports:
===============
Slot Port
============
1 2
1 3
1 4
Backend port credit recovery examples
To enable backend port credit recovery with the link reset only option and to display the configuration:
switch:admin> bottleneckmon --cfgcredittools \
-intport -recover onLrOnly
switch:admin> bottleneckmon --showcredittools
Internal port credit recovery is Enabled with LrOnly