Perfcfgsave – Dell POWEREDGE M1000E User Manual
Page 626
598
Fabric OS Command Reference
53-1002746-01
perfCfgSave
2
perfCfgSave
Saves performance monitoring configuration settings to nonvolatile memory.
SYNOPSIS
perfcfgsave
DESCRIPTION
Use this command to save the current Performance Monitor configuration for end-to-end (EE)
performance monitors to nonvolatile memory. Configuration changes are saved persistently across
power cycles.
The number of monitors that can be saved to flash memory is limited as follows:
•
16 EE monitors per port
•
A total number of 512 EE monitors per switch
When the number of monitors per port or switch exceeds the limit, the following message is displayed:
"Performance monitor count has exceeded limit. Some monitors have been discarded."
NOTES
This command requires an Advanced Performance Monitoring license.
This command is not supported on virtual FC ports (VE/VEX_Port), EX_Port, M (Mirror) ports and GbE
ports.
Monitors created by Web Tools are not saved in persistent memory.
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
None
EXAMPLES
To save the current performance monitoring configuration to firmware:
switch:admin> perfcfgsave
This will overwrite previously saved Performance Monitoring
settings in FLASH. Do you want to continue?
(yes, y, no, n): [no] y
Please wait ...
Performance monitoring configuration saved in FLASH.
SEE ALSO