Supportshowcfgenable – Dell POWEREDGE M1000E User Manual
Page 1025
Fabric OS Command Reference
997
53-1002746-01
supportShowCfgEnable
2
supportShowCfgEnable
Enables a group of commands to be displayed under the supportShow command.
SYNOPSIS
supportshowcfgenable os | exception | port | fabric
| services | security | network | portlog | system
| extend | filter | perfmon | ficon | iswitch | asic_db
| ag | dce_hsl |crypto | fcip
DESCRIPTION
Use this command to enable a group of commands to be displayed under the supportShow command.
Use the supportShowCfgDisable command to disable groups of commands.
The FCIP commands are supported only on the Brocade 7800/FX8-24 platforms and cannot be
configured to collect data on unsupported platforms.
NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
This command has the following operands:
os
Enables the OS group commands.
exception
Enables the exception group commands.
port
Enables the port group commands.
fabric
Enables the fabric group commands.
services
Enables the service group commands.
security
Enables the security group commands.
network
Enables the network group commands.
portlog
Enables the portlog group commands.
system
Enables the system group commands.
extend
Enables the extend group commands.
filter
Enables the filter group commands.
perfmon
Enables the Performance Monitor group commands.
ficon
Enables the FICON group commands.
iswitch
Enables the FC Router group commands.